Assembly Language Tutorial

 
 
 

Instructions

Input - Output Instructions

Display a character Read a character and display it on new line Display string Read digit, compute and display sum w/o variable Read digit, display difference w/o variable Read digit, compute, display sum using variable Read digit, display difference using variable Convert lower case letter in to upper case Read character, display in new line - user prompt Read 1st, middle, last initial - down left margin Read one hex digit, display next line in decimal Display 10*10 solid box asterisk - INT 21H and 9H Read 3 char show in middle of 11*11 box, beep comp

Flow Control Instructions

Print ASCII characters Print counting from 0 to 9 Print upper case letters from A to Z Print lower case letters from a to z in reverse Read letter print if it is \'?\' - simulation of if Read char print smallest - simulation of if-else Positive, negative num- simulation of switch-case Print upper case char - simulation of if-else then Simulation of if-else then structure Print ASCII characters - for loop simulation Print upper case A to Z - while loop simulation Print upper case A to Z - Do while loop simulation Read letters display in next line in alpha order Display digit in next line if fail prompt message Read hex digit display on next line in decimal Display capital letter in string alphabetically Show longest sequence consecutive alphabetically

Logic - Shift - Rotate Instructions

Convert upper to lower case - OR logic instruction Convert lower to upper - AND logic instruction Display even or odd number - TEST instruction Multiply content of AL by 8 - SHL instruction Divide content of AL by 4 - SHR instruction Store binary- BX,count bit value 1 w/o changing BX Read binary num, reverse its bit pattern Read binary number store in BX and display Read char- show ASCII in binary- 1 bit in ASC code Read char print ASCII in HEX till- carriage return Read HEX number and print in binary next line Read binary number and print in HEX next line Read 2 binary number and print its sum in binary Read 2 unsigned HEX num and print their sum Read string of decimal digit print sum in HEX Read str of char ter by CR show reverse order Read character using procedure goto next line Binary form & reverse bit of num - procedures Product by ADD, SHIFT instruction - procedure Display text with letters in each word reversed Validate expression READ store bin num in AX, RANDOM, WRITE

Multiplication - Division Instructions

Print factorial in binary form - MUL instruction Print num decimal form - DIV, OUTDEC proc Print factorial in decimal form - MUL, DIV instru Print num next line - proc for DECIMAL i/o Proc INDEC and OUTDEC, handle BackSpace key Proc INDEC and OUTDEC - files - INCLUDE instru Print factorial in dec form - MUL, DIV instruction Proc INDEC, OUTDEC - Handle OverFlow Read time in seconds display time HH:MM:SS Express - quarter, dime, nickel, pennie Read fraction form M/N print N decimal place GCD of two integers M and N

Arrays - Addressing Modes

Sum of array - sum in AX - Register Indirect Mode Initialize array with 0 using DUP instruction Enter an array of size 10 and display it Declare, initialize, print 2D array of size 5x5 Enter 2D array of 5x5 in row major order, print Print 3rd R x 4th C using Register Indirect Mode Display reversing array contents using STACK Reverse content of array - Register Indirect Mode Sort array using Bubble Sort method Sort an array using Select Sort method Print 2D array of size 4x5 in row major order Print 2D array of size 4x5 in column major order 2D arr clear 3rd row 4th column - Based Index Mode Compute class average on each exam Print name each student, average of 4 exams Insert single characters into array - it is sorted

String Instructions

Copy string into another using MOVSB, REP Read string, stores in variable using STOSB Display string using instruction LODSB Store display str - proc READ_STR, DISP_STR Count no of vowels constants - SCASB, REPNE

General Programs

Get and display the current system time
 
 
 .MODEL SMALL
 .STACK 100H

 .DATA
   PROMPT_1  DB  \'Enter the binary number ( max 16-digit ) : $\'
   PROMPT_2  DB  0DH,0AH,\'The equivalent Hexadecimal number is : $\'
   ILLEGAL   DB  0DH,0AH,\'Illegal binary number. Try again : $\'

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS
     MOV DS, AX

     LEA DX, PROMPT_1             ; load and display the string PROMPT_1
     MOV AH, 9
     INT 21H

     JMP @START_2                 ; jump to label @START_2 

     @START_1:                    ; jump label
       LEA DX, ILLEGAL            ; load and display the string ILLEGAL
       MOV AH, 9
       INT 21H

       XOR BX, BX                 ; clear BX
       MOV DH, 0                  ; initialize DH with 0

     @START_2:                    ; jump label
       MOV AH, 1                  ; read a character 
       INT 21H

       CMP AL, 0DH                ; comapre Al with CR
       JNE @SKIP                  ; jump to label @SKIP if AL!=CR

       CMP DH, 1                  ; compare DH with 1
       JB @START_1                ; jump to label @START_1 if DH<1
       JMP @END                   ; jump to label @END

       @SKIP:                     ; jump label

       INC DH                     ; increment DH by 1
       AND AL, 0FH                ; convert the ascii into decimal code

       CMP AL, 0                  ; compare AL with 0
       JB @START_1                ; jump to label @START_1 if AL<0

       CMP AL, 1                  ; compare AL with 1
       JA @START_1                ; jump to label @START_1 if AL>1

       SHL BX, 1                  ; shift BX towards left by 1 position
       OR BL, AL                  ; set the LSB of BL by AL

       CMP DH, 16                 ; compare DH with 16
       JE @END                    ; jump to label @END if DH=16
       JMP @START_2               ; jump to label @START_2

     @END:                        ; jump label

     LEA DX, PROMPT_2             ; load and display the string PROMPT_2
     MOV AH, 9
     INT 21H

     MOV CX, 4                    ; initialize loop counter
     MOV AH, 2                    ; set output function

     @LOOP_1:                     ; loop label
       XOR DX, DX                 ; clear DX

       @LOOP_2:                   ; jump label
         SHL BX, 1                ; shift BX towards left by 1 position
         RCL DL, 1                ; rotate DL towards left by 1 position
         INC DH                   ; increment DH
         CMP DH, 4                ; compare DH with 4
       JNE @LOOP_2                ; jump to label @LOOP_2 if DH!=4

       CMP DL, 9                  ; compare DL with 9
       JBE @NUMERIC_DIGIT         ; jump to label @NUMERIC_DIGIT if DL<=9
       SUB DL, 9                  ; convert it to number i.e. 1,2,3,4,5,6
       OR DL, 40H                 ; convert number to letter i.e. A,B...F
       JMP @DISPLAY               ; jump to label @DISPLAY

       @NUMERIC_DIGIT:            ; jump label
         OR DL, 30H               ; convert decimal to ascii code

       @DISPLAY:                  ; jump label
         INT 21H                  ; print the character
     LOOP @LOOP_1                 ; jump to label @LOOP_1 if CX!=0

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP
 END MAIN

    Related Post:
  1. Program to performs bubble sort.

  2. Program to read two digits such that second digit is less than the first digit, computes and display their difference ( without using variables ).

  3. Program that prompts the user to enter an 2D array of size 5x5 in row major order and print it.

  4. PROGRAM TO ADD TWO HEX NUMBERS USING THE SHORTCUTS TO THE SEGMENT DIRECTIVES

  5. Program that will read a binary number and print it on the next line in decimal form using DIV instruction and OUTDEC procedure.

  6. PROGRAM TO CONVERT LOWERCASE TO UPPERCASE

  7. Program to swap the cases of a given String

  8. Program to print characters from A to Z on the screen

  9. Program that reads a character and prints it only if it is ? ( Simulation of If structure ).

  10. Add two numbers

  11. PROGRAM TO DISPLAY HELLO WORLD ON THE CONSOLE USING ONLY ONE SEGMENT

  12. Program to read a letter in Upper case and print it after converting it in to Lower case letter ( using OR Logic instruction ).

  13. Program to find out whether a given quadrilateral ABCD is rectangle. Assume that all the four angles and four sides of the quadrilateral are supplie

  14. Program of an array that prints its value before and after clearing the 3rd row and 4th column using based index mode

  15. TO CONVERT A STRING INTO UPPER CASE TO LOWERCASE

  16. PROGRAM TO CLEAR SCREEN

  17. Program to find total of rows and columns of N x M matrix

  18. Program to enter two strings, Find the characters that match in both the strings, store this character and display them at center of screen

  19. Program that declares and initialize a 2D array in row major order, and print the contents of the 3rd row and 4th column using Register Indirect mode

  20. Program that lets the user enter time in seconds, up to 65535, and outputs the time as hours, minutes, and seconds. Use Decimal input.............