Assembly Language Tutorial

 
 
 

Instructions

Input - Output Instructions

Display a character Read a character and display it on new line Display string Read digit, compute and display sum w/o variable Read digit, display difference w/o variable Read digit, compute, display sum using variable Read digit, display difference using variable Convert lower case letter in to upper case Read character, display in new line - user prompt Read 1st, middle, last initial - down left margin Read one hex digit, display next line in decimal Display 10*10 solid box asterisk - INT 21H and 9H Read 3 char show in middle of 11*11 box, beep comp

Flow Control Instructions

Print ASCII characters Print counting from 0 to 9 Print upper case letters from A to Z Print lower case letters from a to z in reverse Read letter print if it is \'?\' - simulation of if Read char print smallest - simulation of if-else Positive, negative num- simulation of switch-case Print upper case char - simulation of if-else then Simulation of if-else then structure Print ASCII characters - for loop simulation Print upper case A to Z - while loop simulation Print upper case A to Z - Do while loop simulation Read letters display in next line in alpha order Display digit in next line if fail prompt message Read hex digit display on next line in decimal Display capital letter in string alphabetically Show longest sequence consecutive alphabetically

Logic - Shift - Rotate Instructions

Convert upper to lower case - OR logic instruction Convert lower to upper - AND logic instruction Display even or odd number - TEST instruction Multiply content of AL by 8 - SHL instruction Divide content of AL by 4 - SHR instruction Store binary- BX,count bit value 1 w/o changing BX Read binary num, reverse its bit pattern Read binary number store in BX and display Read char- show ASCII in binary- 1 bit in ASC code Read char print ASCII in HEX till- carriage return Read HEX number and print in binary next line Read binary number and print in HEX next line Read 2 binary number and print its sum in binary Read 2 unsigned HEX num and print their sum Read string of decimal digit print sum in HEX Read str of char ter by CR show reverse order Read character using procedure goto next line Binary form & reverse bit of num - procedures Product by ADD, SHIFT instruction - procedure Display text with letters in each word reversed Validate expression READ store bin num in AX, RANDOM, WRITE

Multiplication - Division Instructions

Print factorial in binary form - MUL instruction Print num decimal form - DIV, OUTDEC proc Print factorial in decimal form - MUL, DIV instru Print num next line - proc for DECIMAL i/o Proc INDEC and OUTDEC, handle BackSpace key Proc INDEC and OUTDEC - files - INCLUDE instru Print factorial in dec form - MUL, DIV instruction Proc INDEC, OUTDEC - Handle OverFlow Read time in seconds display time HH:MM:SS Express - quarter, dime, nickel, pennie Read fraction form M/N print N decimal place GCD of two integers M and N

Arrays - Addressing Modes

Sum of array - sum in AX - Register Indirect Mode Initialize array with 0 using DUP instruction Enter an array of size 10 and display it Declare, initialize, print 2D array of size 5x5 Enter 2D array of 5x5 in row major order, print Print 3rd R x 4th C using Register Indirect Mode Display reversing array contents using STACK Reverse content of array - Register Indirect Mode Sort array using Bubble Sort method Sort an array using Select Sort method Print 2D array of size 4x5 in row major order Print 2D array of size 4x5 in column major order 2D arr clear 3rd row 4th column - Based Index Mode Compute class average on each exam Print name each student, average of 4 exams Insert single characters into array - it is sorted

String Instructions

Copy string into another using MOVSB, REP Read string, stores in variable using STOSB Display string using instruction LODSB Store display str - proc READ_STR, DISP_STR Count no of vowels constants - SCASB, REPNE

General Programs

Get and display the current system time
 

Program that reads a binary number, stores it in BX and display it.

 
 .MODEL SMALL
 .STACK 100H

 .DATA
   PROMPT_1  DB  \'Enter the binary number (max 16-bit) : $\'
   PROMPT_2  DB  0DH,0AH,\'The given binary number (16-bit) is : $\'

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS  
     MOV DS, AX

     LEA DX, PROMPT_1             ; load and display PROMPT_1   
     MOV AH, 9
     INT 21H

     XOR BX, BX                   ; clear BX 
     MOV CX, 16                   ; initialize loop counter
     MOV AH, 1                    ; set input function

     @INPUT:                      ; jump label
       INT 21H                    ; read a digit
       CMP AL, 0DH                ; compare digit with carriage return 
       JE @END                    ; jump to label @END if carriage return
       AND AL, 0FH                ; convert ascii to decimal code
       SHL BX, 1                  ; rotate BX to left by 1 bit
       OR BL, AL                  ; set the LSB of BX with input
     LOOP @INPUT                  ; jump to label @INPUT

     @END:                        ; jump label

     LEA DX, PROMPT_2             ; load and display PROMPT_2   
     MOV AH, 9
     INT 21H

     MOV CX, 16                   ; initialize loop counter
     MOV AH, 2                    ; set output function

     @OUTPUT:                     ; jump label
       SHL BX, 1                  ; shift left BX by 1 bit

       JNC @ZERO                  ; jump to label @ZERO if CF=0
         MOV DL, 31H              ; set DL=1
         JMP @DISPLAY             ; jump to label @DISPLAY

       @ZERO:                     ; jump label
         MOV DL, 30H              ; set DL=0

       @DISPLAY:                  ; jump label
         INT 21H                  ; display digit
     LOOP @OUTPUT                 ; jump to label @OUTPUT

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP
 END MAIN

    Related Post:
  1. Program to check given two values are equal or not
  2. PROGRAM TO CONVERT LOWERCASE TO UPPERCASE
  3. Program to convert hexadecimal number to binary
  4. Program that will read a positive binary number and print its factorial in decimal form using MUL and DIV instructionsand use OUTDEC procedure........
  5. PROGRAM TO DISPLAY HELLO WORLD ON THE CONSOLE USING ONLY ONE SEGMENT
  6. Program that prompts the user to enter an array of size 10 and display it.
  7. PROGRAM TO ADD TWO HEXADECIMAL NUMBERS USING THE SEGMENT DEFINITIONS
  8. Program to Print the Fibonacci series
  9. Program to print counting from 0 to 9
  10. PROGRAM TO WRITE A PROGRAM TO ADD TWO MEMORY LOCATIONS AND STORE THE RESULT IN THIRD MEMORY LOCATION
  11. PROGRAM TO RESTART THE COMPUTER
  12. To read string character by character and display them
  13. Program that starts with an initially undefined byte array of maximum 100, and lets the user insert single characters into the array......
  14. Program to compare two strings
  15. Add two numbers
  16. Program to accept N names from the user and sort them in descending order
  17. Program to copy one string into another string use subroutine
  18. Program that reads a digit, computes and prints P if it is positive, N if it is negative and Z if it is zero( Simulation of switch-case statemt)
  19. Program to read a letter in Lower case and print it after converting it in to Upper case letter..........
  20. Program that take a number of cents C, 0<=C<=99, and express C as half-dollars, quarters, dimes, nickels, and pennies. Use INDEC to enter C
 
 
Didn't find what you were looking for? Find more on Program that reads a binary number, stores it in BX and display it.