Assembly Language Tutorial

 
 
 

Instructions

Input - Output Instructions

Display a character Read a character and display it on new line Display string Read digit, compute and display sum w/o variable Read digit, display difference w/o variable Read digit, compute, display sum using variable Read digit, display difference using variable Convert lower case letter in to upper case Read character, display in new line - user prompt Read 1st, middle, last initial - down left margin Read one hex digit, display next line in decimal Display 10*10 solid box asterisk - INT 21H and 9H Read 3 char show in middle of 11*11 box, beep comp

Flow Control Instructions

Print ASCII characters Print counting from 0 to 9 Print upper case letters from A to Z Print lower case letters from a to z in reverse Read letter print if it is \'?\' - simulation of if Read char print smallest - simulation of if-else Positive, negative num- simulation of switch-case Print upper case char - simulation of if-else then Simulation of if-else then structure Print ASCII characters - for loop simulation Print upper case A to Z - while loop simulation Print upper case A to Z - Do while loop simulation Read letters display in next line in alpha order Read hex digit display on next line in decimal Display digit in next line if fail prompt message Display capital letter in string alphabetically Show longest sequence consecutive alphabetically

Logic - Shift - Rotate Instructions

Convert upper to lower case - OR logic instruction Convert lower to upper - AND logic instruction Display even or odd number - TEST instruction Multiply content of AL by 8 - SHL instruction Divide content of AL by 4 - SHR instruction Store binary- BX,count bit value 1 w/o changing BX Read binary num, reverse its bit pattern Read binary number store in BX and display Read char- show ASCII in binary- 1 bit in ASC code Read char print ASCII in HEX till- carriage return Read HEX number and print in binary next line Read binary number and print in HEX next line Read 2 binary number and print its sum in binary Read 2 unsigned HEX num and print their sum Read string of decimal digit print sum in HEX Read str of char ter by CR show reverse order Read character using procedure goto next line Binary form & reverse bit of num - procedures Product by ADD, SHIFT instruction - procedure Display text with letters in each word reversed Validate expression READ store bin num in AX, RANDOM, WRITE

Multiplication - Division Instructions

Print factorial in binary form - MUL instruction Print num decimal form - DIV, OUTDEC proc Print factorial in decimal form - MUL, DIV instru Print num next line - proc for DECIMAL i/o Proc INDEC and OUTDEC, handle BackSpace key Proc INDEC and OUTDEC - files - INCLUDE instru Print factorial in dec form - MUL, DIV instruction Proc INDEC, OUTDEC - Handle OverFlow Read time in seconds display time HH:MM:SS Express - quarter, dime, nickel, pennie Read fraction form M/N print N decimal place GCD of two integers M and N

Arrays - Addressing Modes

Sum of array - sum in AX - Register Indirect Mode Initialize array with 0 using DUP instruction Enter an array of size 10 and display it Declare, initialize, print 2D array of size 5x5 Enter 2D array of 5x5 in row major order, print Print 3rd R x 4th C using Register Indirect Mode Display reversing array contents using STACK Reverse content of array - Register Indirect Mode Sort array using Bubble Sort method Sort an array using Select Sort method Print 2D array of size 4x5 in row major order Print 2D array of size 4x5 in column major order 2D arr clear 3rd row 4th column - Based Index Mode Compute class average on each exam Print name each student, average of 4 exams Insert single characters into array - it is sorted

String Instructions

Copy string into another using MOVSB, REP Read string, stores in variable using STOSB Display string using instruction LODSB Store display str - proc READ_STR, DISP_STR Count no of vowels constants - SCASB, REPNE

General Programs

Get and display the current system time
 
 
 .MODEL SMALL
 .STACK 100H

 .DATA
   PROMPT     DB  \'Enter a HEX digit : $\'
   DECIMAL    DB  \'The equivalent Decimal digit is : $\'
   CONTINUE   DB  \'Do you want to do it again : $\'
   ILLEGAL    DB  \'Illegal Character - Enter 0..9 or A..F : $\'
   TERMINATE  DB  \'You failed to enter a HEX DIGIT, press any key to exit. $\'
   NEXT_LINE  DB  0DH,0AH,\"$\"

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS
     MOV DS, AX

     @START_1:                    ; jump label
       MOV AH, 9                  ; set string output function
       LEA DX, PROMPT             ; load and display the string PROMPT
       INT 21H

     @START_2:                    ; jump label
       MOV AH, 1                  ; read a character
       INT 21H

       MOV BL, AL                 ; save the character into BL

       CMP BL, \"A\"                ; compare BL with \"A\"
       JB @SINGAL_DIGIT           ; jump to label @SINGAL_DIGIT if BL<A

       CMP BL, \"F\"                ; compare BL with \"F\"
       JA @ILLEGAL_CHARACTER      ; jump to label @ILLEGAL_CHARACTER if BL>F

       JMP @GREATER_THAN_NINE     ; jump to label @GREATER_THAN_NINE

     @SINGAL_DIGIT:               ; jump label
       CMP BL, \"0\"                ; comapre BL with \"0\"
       JB @ILLEGAL_CHARACTER      ; jump to label @ILLEGAL_CHARACTER if BL<0

       CMP BL, \"9\"                ; compare BL with \"9\"
       JA @ILLEGAL_CHARACTER      ; jump to label #ILLEGAL_CHARACTER if BL>9

       JMP @LESS_THAN_TEN         ; jump to label @LESS_THAN_TEN

     @ILLEGAL_CHARACTER:          ; jump label
       INC CL                     ; increment CL

       CMP CL, 3                  ; compare CL and 3
       JE @TERMINATE              ; jump to label @TERMINATE if CL=3  

       MOV AH, 9                  ; set string output function

       LEA DX, NEXT_LINE          ; load and display the string NEXT_LINE
       INT 21H

       LEA DX, ILLEGAL            ; load and display the string ILLEGAL
       INT 21H

       JMP @START_2               ; jump to label @START_2

     @LESS_THAN_TEN:              ; jump label
       MOV CL, 0                  ; move 0 to CL
       MOV AH, 9                  ; set string output function

       LEA DX, NEXT_LINE          ; load and display the string NEXT_LINE
       INT 21H

       LEA DX, DECIMAL            ; load and display the string DECIMAL
       INT 21H

       MOV AH, 2                  ; print the contents of BL
       MOV DL, BL
       INT 21H

       JMP @CONTINUE              ; jump to label @CONTINUE

     @GREATER_THAN_NINE:          ; jump label
       MOV CL, 0                  ; move 0 to CL
       MOV AH, 9                  ; set string output function

       LEA DX, NEXT_LINE          ; load and display the string  NEXT_LINE
       INT 21H

       LEA DX, DECIMAL            ; load and display the string DECIMAL
       INT 21H

       MOV AH, 2                  ; display the digit 1
       MOV DL, 31H
       INT 21H

       SUB BL, 11H                ; subtract 11H from BL to find 2nd digit

       MOV DL, BL                 ; display the 2nd digit
       INT 21H

     @CONTINUE:                   ; jump label
       MOV AH, 9                  ; set string output function

       LEA DX, NEXT_LINE          ; load and display the string NEXT_LINE
       INT 21H
       INT 21H

       LEA DX, CONTINUE           ; load and display the string CONTINUE
       INT 21H

       MOV AH, 1                  ; read a character
       INT 21H

       CMP AL, \"y\"                ; compare AL with \"y\"
       JE @JUMP                   ; jump to label @JUMP if AL=y

       CMP AL, \"Y\"                ; compare AL with \"Y\"
       JE @JUMP                   ; jump to label @JUMP if AL=Y

       JMP @END                   ; jump to label @END

     @JUMP:                       ; jump label
       LEA DX, NEXT_LINE          ; load and display the string NEXT_LINE
       MOV AH, 9
       INT 21H
       INT 21H

       JMP @START_1               ; jump to label @START_1

     @TERMINATE:                  ; jump label
       MOV AH, 9                  ; set string output function

       LEA DX, NEXT_LINE          ; load and display the string NEXT_LINE
       INT 21H
       INT 21H

       LEA DX, TERMINATE          ; load and display the string TERMINATE
       INT 21H

       MOV AH, 1                  ; read a character
       INT 21H

     @END:                        ; jump label

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP
 END MAIN

    Related Post:
  1. PROGRAM TO FIND THE REVERSE OF A STRING USING MACRO

  2. Program to find the factorial of a number

  3. PROGRAM TO CLEAR THE SCREEN AND MAKE BLUE FOREGROUND

  4. PROGRAM TO COPY ONE STRING INTO ANOTHER STRING WITH AND WITHOUT USING MOVSB INSTRUCTION USING MACRO

  5. Program to read a number in binary form, display a number in binary form and reverse the bit pattern of the number( use procedures for each part. )

  6. Program that will read a decimal number and print it on the next line using procedures INDEC and OUTDEC. The INDEC procedure should be able...........

  7. Program for divide 10 of array by 10 and check each greater than 10 add 10 and each greater than 20 add 50

  8. Program to print Upper Case Letters from A to Z ( Simulation of Do-While Loop )

  9. To divide 10 8-bit data in an array by 20 and store the result in another array, first quotient and then remainder

  10. Program that prompts the user to enter a string of decimal digits, ending with a carriage retuen, and prints their sum in hex......

  11. An Assembly Language Program to find 2s Complement of given binary number

  12. PROGRAM TO COMPARE TWO STRINGS WITH AND WITHOUT USING CMPSB INSTRUCTION USING MACRO

  13. Program to Print the Fibonacci series

  14. Program to read two digits whose sum is less than 0, computes and display their sum (without using variables)

  15. Program to find the addition and average of 1 to n no

  16. Program to check whether the fourth bit of the byte stored at location X is 0 or 1

  17. Program to Open an Existing file write into it and close it

  18. Program to find the factorial of a number use subroutine

  19. Program to enter two strings, Find the characters that match in both the strings, store this character and display them at center of screen

  20. Program that find the greatest common divisor (GCD) of two integers M and N