Assembly Language Tutorial

 
 
 

Instructions

Input - Output Instructions

Display a character Read a character and display it on new line Display string Read digit, compute and display sum w/o variable Read digit, display difference w/o variable Read digit, compute, display sum using variable Read digit, display difference using variable Convert lower case letter in to upper case Read character, display in new line - user prompt Read 1st, middle, last initial - down left margin Read one hex digit, display next line in decimal Display 10*10 solid box asterisk - INT 21H and 9H Read 3 char show in middle of 11*11 box, beep comp

Flow Control Instructions

Print ASCII characters Print counting from 0 to 9 Print upper case letters from A to Z Print lower case letters from a to z in reverse Read letter print if it is \'?\' - simulation of if Read char print smallest - simulation of if-else Positive, negative num- simulation of switch-case Print upper case char - simulation of if-else then Simulation of if-else then structure Print ASCII characters - for loop simulation Print upper case A to Z - while loop simulation Print upper case A to Z - Do while loop simulation Read letters display in next line in alpha order Display digit in next line if fail prompt message Read hex digit display on next line in decimal Display capital letter in string alphabetically Show longest sequence consecutive alphabetically

Logic - Shift - Rotate Instructions

Convert upper to lower case - OR logic instruction Convert lower to upper - AND logic instruction Display even or odd number - TEST instruction Multiply content of AL by 8 - SHL instruction Divide content of AL by 4 - SHR instruction Store binary- BX,count bit value 1 w/o changing BX Read binary num, reverse its bit pattern Read binary number store in BX and display Read char- show ASCII in binary- 1 bit in ASC code Read char print ASCII in HEX till- carriage return Read HEX number and print in binary next line Read binary number and print in HEX next line Read 2 binary number and print its sum in binary Read 2 unsigned HEX num and print their sum Read string of decimal digit print sum in HEX Read str of char ter by CR show reverse order Read character using procedure goto next line Binary form & reverse bit of num - procedures Product by ADD, SHIFT instruction - procedure Display text with letters in each word reversed Validate expression READ store bin num in AX, RANDOM, WRITE

Multiplication - Division Instructions

Print factorial in binary form - MUL instruction Print num decimal form - DIV, OUTDEC proc Print factorial in decimal form - MUL, DIV instru Print num next line - proc for DECIMAL i/o Proc INDEC and OUTDEC, handle BackSpace key Proc INDEC and OUTDEC - files - INCLUDE instru Print factorial in dec form - MUL, DIV instruction Proc INDEC, OUTDEC - Handle OverFlow Read time in seconds display time HH:MM:SS Express - quarter, dime, nickel, pennie Read fraction form M/N print N decimal place GCD of two integers M and N

Arrays - Addressing Modes

Sum of array - sum in AX - Register Indirect Mode Initialize array with 0 using DUP instruction Enter an array of size 10 and display it Declare, initialize, print 2D array of size 5x5 Enter 2D array of 5x5 in row major order, print Print 3rd R x 4th C using Register Indirect Mode Display reversing array contents using STACK Reverse content of array - Register Indirect Mode Sort array using Bubble Sort method Sort an array using Select Sort method Print 2D array of size 4x5 in row major order Print 2D array of size 4x5 in column major order 2D arr clear 3rd row 4th column - Based Index Mode Compute class average on each exam Print name each student, average of 4 exams Insert single characters into array - it is sorted

String Instructions

Copy string into another using MOVSB, REP Read string, stores in variable using STOSB Display string using instruction LODSB Store display str - proc READ_STR, DISP_STR Count no of vowels constants - SCASB, REPNE

General Programs

Get and display the current system time
 
 
 .MODEL SMALL
 .STACK 100H

 .DATA
    PROMPT_1   DB  \'The Class Marks are as follows : \',0DH,0AH,\'$\'
    PROMPT_2   DB  0DH,0AH,\'The Average Marks are as follows : $\'

    AVERAGE  DW  5 DUP(0)
    MARKS    DW  67,45,98,33        ; Mary Allen
             DW  70,56,87,44        ; Scott Baylis
             DW  82,72,89,40        ; George Frank
             DW  80,67,95,50        ; Beth Harris
             DW  78,76,92,60        ; Sam Wong

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS
     MOV DS, AX

     LEA DX, PROMPT_1             ; load and print the string PROMPT_1
     MOV AH, 9
     INT 21H

     LEA SI, MARKS                ; set SI=offset address of variable MARKS
     MOV BH, 5                    ; set BH=5
     MOV BL, 4                    ; set BL=4

     CALL PRINT_2D_ARRAY          ; call the procedure PRINT_2D_ARRAY

     XOR SI, SI                   ; clear SI
     MOV CX, 4                    ; set CX=4

     @COMPUTE_AVERAGE:            ; loop label
       XOR AX, AX                 ; clear AX
       XOR BX, BX                 ; clear BX
       MOV DX, 5                  ; set DX=5

       @SUM:                      ; loop label
         ADD AX, MARKS[BX+SI]     ; set AX=AX+MARKS[BX+SI]
         ADD BX, 8                ; set BX=BX+8
         DEC DX                   ; set DX=DX-1
       JNZ @SUM                   ; jump to label @SUM if DX!=0

       MOV BX, 5                  ; set BX=5
       DIV BX                     ; set AX=DX:AX/BX , DX=DX:AX%BX
       MOV AVERAGE[SI], AX        ; set AVERAGE[SI]=AX
       ADD SI, 2                  ; set SI=SI+2
     LOOP @COMPUTE_AVERAGE        ; jump to label @COMPUTE_AVERAGE while CX!=0

     LEA DX, PROMPT_2             ; load and print the string PROMPT_2
     MOV AH, 9                     
     INT 21H

     LEA SI, AVERAGE              ; set SI=offset address of variable AVERAGE
     MOV BX, 4                    ; set BX=4

     CALL PRINT_ARRAY             ; call the procedure PRINT_ARRAY

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP



 ;-------------------------  Procedure Definitions  ------------------------;




 ;-----------------------------  PRINT_ARRAY  ------------------------------;


 PRINT_ARRAY PROC
   ; this procedure will print the elements of a given array
   ; input : SI=offset address of the array
   ;       : BX=size of the array
   ; output : none

   PUSH AX                        ; push AX onto the STACK   
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK

   MOV CX, BX                     ; set CX=BX

   @PRINT_ARRAY:                  ; loop label
     MOV AX, [SI]                 ; set AX=AX+[SI]

     CALL OUTDEC                  ; call the procedure OUTDEC

     MOV AH, 2                    ; set output function
     MOV DL, 20H                  ; set DL=20H
     INT 21H                      ; print a character

     ADD SI, 2                    ; set SI=SI+2
   LOOP @PRINT_ARRAY              ; jump to label @PRINT_ARRAY while CX!=0

   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP AX                         ; pop a value from STACK into AX

   RET                            ; return control to the calling procedure
 PRINT_ARRAY ENDP


 ;-----------------------------  PRINT_2D_ARRAY  ---------------------------;


  PRINT_2D_ARRAY PROC
    ; this procedure will print the given 2D array
    ; input : SI=offset address of the 2D array
    ;       : BH=number of rows
    ;       : BL=number of columns 
    ; output : none

   PUSH AX                        ; push BX onto the STACK
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK
   PUSH SI                        ; push SI onto the STACK

   MOV CX, BX                     ; set CX=BX

   @OUTER_LOOP:                   ; loop label
     MOV CL, BL                   ; set CL=BL

     @INNER_LOOP:                 ; loop label
       MOV AH, 2                  ; set output function
       MOV DL, 20H                ; set DL=20H
       INT 21H                    ; print a character

       MOV AX, [SI]               ; set AX=[SI]

       CALL OUTDEC                ; call the procedure OUTDEC

       ADD SI, 2                  ; set SI=SI+2
       DEC CL                     ; set CL=CL-1
     JNZ @INNER_LOOP              ; jump to label @INNER_LOOP if CL!=0

     MOV AH, 2                    ; set output function
     MOV DL, 0DH                  ; set DL=0DH
     INT 21H                      ; print a character

     MOV DL, 0AH                  ; set DL=0AH
     INT 21H                      ; print a character

     DEC CH                       ; set CH=CH-1
   JNZ @OUTER_LOOP                ; jump to label @OUTER_LOOP if CX!=0

   POP SI                         ; pop a value from STACK into SI
   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP AX                         ; pop a value from STACK into AX

   RET
 PRINT_2D_ARRAY ENDP


 ;--------------------------------  OUTDEC  --------------------------------;


 OUTDEC PROC
   ; this procedure will display a decimal number
   ; input : AX
   ; output : none

   PUSH BX                        ; push BX onto the STACK
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK

   XOR CX, CX                     ; clear CX
   MOV BX, 10                     ; set BX=10

   @OUTPUT:                       ; loop label
     XOR DX, DX                   ; clear DX
     DIV BX                       ; divide AX by BX
     PUSH DX                      ; push DX onto the STACK
     INC CX                       ; increment CX
     OR AX, AX                    ; take OR of Ax with AX
   JNE @OUTPUT                    ; jump to label @OUTPUT if ZF=0

   MOV AH, 2                      ; set output function

   @DISPLAY:                      ; loop label
     POP DX                       ; pop a value from STACK to DX
     OR DL, 30H                   ; convert decimal to ascii code
     INT 21H                      ; print a character
   LOOP @DISPLAY                  ; jump to label @DISPLAY if CX!=0

   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP BX                         ; pop a value from STACK into BX

   RET                            ; return control to the calling procedure
 OUTDEC ENDP





 END MAIN

    Related Post:
  1. Program to find the first and last character of a string and print it on the screen

  2. Appli which separates odd and even numbers from given 10 8-bit data stored in memory locations and store in different array and add them individually

  3. Program that will prompt the user to enter a hex digit character ( 0...9 or A...F ), display it on the next line in decimal. If the user....

  4. Program that lets the user enter time in seconds, up to 65535, and outputs the time as hours, minutes, and seconds. Use Decimal input.............

  5. PRINT A FIBONACCI SERIES

  6. AN APPLICATION WHICH DIVIDES 10 8-BIT DATA STORED IN ARRAY BY 20 AND STORE IN 2ND ARRAY QUOTIENT AND THEN REMAINDER

  7. To read string character by character and display them

  8. PROGRAM TO CHANGE THE SIZE OF CURSOR

  9. Program that computes the sum of an array. Place the sum in AX and also display it. Use Register Indirect Mode to access the array elements

  10. Program to find the square and cube of a number

  11. Program for divide 10 of array by 10 and check each greater than 10 add 10 and each greater than 20 add 50

  12. Program that lets the user type some text, consisting of words separated by blanks, ending with a carriage return, and displays the text..............

  13. Program to read two digits such that second digit is less than the first digit, computes and display their difference ( without using variables ).

  14. PROGRAM WHICH WILL DISPLAY ONE CHARACTER ON SCREEN UNTIL $ COMES

  15. Program to sort 8-bit numbers

  16. To store any five 8-bit numbers and check, if a no. is > 30 then add 10 otherwise add 20

  17. Program to read two digits whose sum is less than 0, computes and display their sum (without using variables)

  18. Program that prompts the user to enter a string, then counts and display the number of vowels and consonants....

  19. PROGRAM TO CONVERT UPPPERCASE TO LOWERCASE

  20. Program to read two digits whose sum is less than 0, computes and display their sum (using variables)

 
 
Didn't find what you were looking for? Find more on Program that will compute the class average on each exam