Assembly Language Tutorial

 
 
 

Instructions

Input - Output Instructions

Display a character Read a character and display it on new line Display string Read digit, compute and display sum w/o variable Read digit, display difference w/o variable Read digit, compute, display sum using variable Read digit, display difference using variable Convert lower case letter in to upper case Read character, display in new line - user prompt Read 1st, middle, last initial - down left margin Read one hex digit, display next line in decimal Display 10*10 solid box asterisk - INT 21H and 9H Read 3 char show in middle of 11*11 box, beep comp

Flow Control Instructions

Print ASCII characters Print counting from 0 to 9 Print upper case letters from A to Z Print lower case letters from a to z in reverse Read letter print if it is \'?\' - simulation of if Read char print smallest - simulation of if-else Positive, negative num- simulation of switch-case Print upper case char - simulation of if-else then Simulation of if-else then structure Print ASCII characters - for loop simulation Print upper case A to Z - while loop simulation Print upper case A to Z - Do while loop simulation Read letters display in next line in alpha order Display digit in next line if fail prompt message Read hex digit display on next line in decimal Display capital letter in string alphabetically Show longest sequence consecutive alphabetically

Logic - Shift - Rotate Instructions

Convert upper to lower case - OR logic instruction Convert lower to upper - AND logic instruction Display even or odd number - TEST instruction Multiply content of AL by 8 - SHL instruction Divide content of AL by 4 - SHR instruction Store binary- BX,count bit value 1 w/o changing BX Read binary num, reverse its bit pattern Read binary number store in BX and display Read char- show ASCII in binary- 1 bit in ASC code Read char print ASCII in HEX till- carriage return Read HEX number and print in binary next line Read binary number and print in HEX next line Read 2 binary number and print its sum in binary Read 2 unsigned HEX num and print their sum Read string of decimal digit print sum in HEX Read str of char ter by CR show reverse order Read character using procedure goto next line Binary form & reverse bit of num - procedures Product by ADD, SHIFT instruction - procedure Display text with letters in each word reversed Validate expression READ store bin num in AX, RANDOM, WRITE

Multiplication - Division Instructions

Print factorial in binary form - MUL instruction Print num decimal form - DIV, OUTDEC proc Print factorial in decimal form - MUL, DIV instru Print num next line - proc for DECIMAL i/o Proc INDEC and OUTDEC, handle BackSpace key Proc INDEC and OUTDEC - files - INCLUDE instru Print factorial in dec form - MUL, DIV instruction Proc INDEC, OUTDEC - Handle OverFlow Read time in seconds display time HH:MM:SS Express - quarter, dime, nickel, pennie Read fraction form M/N print N decimal place GCD of two integers M and N

Arrays - Addressing Modes

Sum of array - sum in AX - Register Indirect Mode Initialize array with 0 using DUP instruction Enter an array of size 10 and display it Declare, initialize, print 2D array of size 5x5 Enter 2D array of 5x5 in row major order, print Print 3rd R x 4th C using Register Indirect Mode Display reversing array contents using STACK Reverse content of array - Register Indirect Mode Sort array using Bubble Sort method Sort an array using Select Sort method Print 2D array of size 4x5 in row major order Print 2D array of size 4x5 in column major order 2D arr clear 3rd row 4th column - Based Index Mode Compute class average on each exam Print name each student, average of 4 exams Insert single characters into array - it is sorted

String Instructions

Copy string into another using MOVSB, REP Read string, stores in variable using STOSB Display string using instruction LODSB Store display str - proc READ_STR, DISP_STR Count no of vowels constants - SCASB, REPNE

General Programs

Get and display the current system time
 
 
 .MODEL SMALL
 .STACK 100H

 .DATA
    PROMPT  DB  \'The Array elements are : $\'

    ARRAY   DB  10 DUP(0)

 .CODE
   MAIN PROC
     MOV AX, @DATA                ; initialize DS
     MOV DS, AX

     LEA DX, PROMPT               ; load and display the string PROMPT
     MOV AH, 9                    
     INT 21H

     MOV CX, 10                   ; set CX=10
     LEA SI, ARRAY                ; set SI=offset address of ARRAY

     @SHOW:                       ; loop label
       XOR AH, AH                 ; clear AH
       MOV AL, [SI]               ; set AL=[SI]

       CALL OUTDEC                ; call the procedure OUTDEC

       MOV AH, 2                  ; set output function
       MOV DL, 20H                ; set DL=20H
       INT 21H                    ; print a character

       INC SI                     ; set SI=SI+1
     LOOP @SHOW                   ; jump to label @SHOW while CX!=0

     MOV AH, 4CH                  ; return control to DOS
     INT 21H
   MAIN ENDP



 ;-------------------------  Procedure Definitions  ------------------------;




 ;--------------------------------  OUTDEC  --------------------------------;


 OUTDEC PROC
   ; this procedure will display a decimal number
   ; input : AX
   ; output : none

   PUSH BX                        ; push BX onto the STACK
   PUSH CX                        ; push CX onto the STACK
   PUSH DX                        ; push DX onto the STACK

   CMP AX, 0                      ; compare AX with 0
   JGE @START                     ; jump to label @START if AX>=0

   PUSH AX                        ; push AX onto the STACK

   MOV AH, 2                      ; set output function
   MOV DL, \"-\"                    ; set DL=\'-\'
   INT 21H                        ; print the character

   POP AX                         ; pop a value from STACK into AX

   NEG AX                         ; take 2\'s complement of AX

   @START:                        ; jump label

   XOR CX, CX                     ; clear CX
   MOV BX, 10                     ; set BX=10

   @OUTPUT:                       ; loop label
     XOR DX, DX                   ; clear DX
     DIV BX                       ; divide AX by BX
     PUSH DX                      ; push DX onto the STACK
     INC CX                       ; increment CX
     OR AX, AX                    ; take OR of Ax with AX
   JNE @OUTPUT                    ; jump to label @OUTPUT if ZF=0

   MOV AH, 2                      ; set output function

   @DISPLAY:                      ; loop label
     POP DX                       ; pop a value from STACK to DX
     OR DL, 30H                   ; convert decimal to ascii code
     INT 21H                      ; print a character
   LOOP @DISPLAY                  ; jump to label @DISPLAY if CX!=0

   POP DX                         ; pop a value from STACK into DX
   POP CX                         ; pop a value from STACK into CX
   POP BX                         ; pop a value from STACK into BX

   RET                            ; return control to the calling procedure
 OUTDEC ENDP





 END MAIN

    Related Post:
  1. Program to get the message and print the same when enter key is pressed

  2. Program to display a string

  3. Program to find the total no. of even and odd nos. from an array

  4. Program which gives +, -, /, * of 2 8 bit numbers

  5. Program to display a ?, read two capital letters, and display them on the next line in alphabetical order.

  6. PROGRAM TO CLEAR SCREEN

  7. Program to accept a name from the user and check whether the name is present in the defined table, If not present then insert the name in the table

  8. Write a Program to reverse a string

  9. Program that will read a binary number and print it on the next line in decimal form using DIV instruction and OUTDEC procedure.

  10. Program that initialize an array of size 10 with 0 using DUP instruction. Also display the array elements.

  11. Program to print Lower Case Letters from a to z in reverse order

  12. Program to find the largest and smallest number from an array of n 16 bit nos

  13. Program to enter two 16 bit binary numbers and perform OR operation on it

  14. Program that prompts the user to enter two unsigned hex numbers, 0 to FFFF, and print their sum on the next line. If the user enters an illegal....

  15. PROGRAM TO ADD A CONSTANT TO EACH ELEMENT OF AN ARRAY

  16. Program to enter two strings, Find the characters that match in both the strings, store this character and display them at center of screen

  17. PROGRAM TO CONVERT UPPPERCASE TO LOWERCASE

  18. Program that declares and initializes a 2D array of size 4x5 in row major order, and print it.

  19. Program to read two digits whose sum is less than 0, computes and display their sum (without using variables)

  20. Program that prompts the user to type a hex number of four hex digits or less, and outputs it in binary on the next line. If the user......